Royal Enfield Lever CC + Pin + Nut Part No: KAB00767A
₹2,018.00Clutch Lever set complete with pivot pin and locking nut.
Showing 226–300 of 351 results

Clutch Lever set complete with pivot pin and locking nut.

Black Finish Control Lever complete with pin and nut.

Low-profile Black Dual Seat for easier ground reach and comfortable posture.

Sleek Black Mirror Kit (LH & RH) for clear rear visibility.

Genuine Mirror Set (Left and Right) for crystal-clear rear view vision.

Replacement Rear Mudguard Mudflap extension for debris protection.

Front Mudguard Bottom extension piece for complete splash protection.

Factory-painted Front Mudguard in Classic Ash for CL350.

Weatherproof Navy Blue Water Resistant Bike Cover with elastic hem.

Royal Enfield Wheel Speed Sensor, ABS (Part No. RAB00036/B) is a replacement component for the specified motorcycle system. The ABS wheel-speed sensor reads wheel rotation for the anti-lock braking system. Sensor position, cable length, connector and tone-ring relationship are safety-critical; use the exact specified front/rear variant rather than selecting by visual similarity. Verified application: Listed for ABS-equipped Royal Enfield applications including Classic 350/500 UCE, Bullet ABS variants, Himalayan 411, Interceptor 650, Continental GT 650 and Super Meteor 650. The source specifies the front sensor; verify exact connector and model/year. Before ordering, compare the part number, original component, variant and relevant mount/connector details. Confirm that this is the required wheel position (source lists front sensor), connector and ABS tone-ring layout.

Royal Enfield Switch Module RH (Part Number RAC00411/E) is a spare part or product identified by its exact part number. Match the part number and vehicle application before ordering. Verify vehicle/model compatibility by exact part number.

Royal Enfield Switch Module LH (Part Number RAC00412/F) is a spare part or product identified by its exact part number. Match the part number and vehicle application before ordering. Verify vehicle/model compatibility by exact part number.

Royal Enfield Part No. RAC00467/A – RR Unit – Three Phase Series. The package label identifies an RR (regulator/rectifier) unit, three-phase series. This component forms part of the charging system and regulates/rectifies alternator output. The wiring harness and connector must match the exact motorcycle. Price reference: ₹3,370.00 (MRP shown on supplied label). Please match the exact part number and motorcycle application before ordering.

Royal Enfield RR Unit (Part No. RAC00982/A) is a replacement component for the specified motorcycle system. An RR unit (regulator/rectifier) is part of the charging system: it rectifies generator output and regulates voltage supplied to the electrical system and battery. Wire count, connector arrangement and model generation must match exactly. Verified application: Early J-Series electrical application listed for the Classic 350 (approximately 2021–2022) and Meteor 350 (approximately 2020–2021), with a 5-wire Besmak regulator/rectifier configuration. Do not substitute a different wire-count or later RR-unit variant. Before ordering, compare the part number, original component, variant and relevant mount/connector details. Confirm the 5-wire Besmak connector layout. A different wire-count or later RR unit may not plug in or function correctly.

Royal Enfield RR Unit, Series (Part No. RAC01277/A) is a replacement component for the specified motorcycle system. An RR unit is an electrical charging-system component that regulates/rectifies generator output. The exact series, connector shape, wire count and electrical specification must be confirmed for this SKU before fitting. Model/year compatibility is not fully confirmed from the supplied label; Before ordering, compare the part number, original component, variant and relevant mount/connector details. Verify wire count, connector, supplier/make and motorcycle year using the original RR-unit label or official parts catalogue.

Royal Enfield Part No. RAE00029/C – Heel Rubber – Gear Pedal. The package label identifies Heel Rubber, Gear Pedal. This rubber contact surface fits the matching gear-pedal end; compare diameter and attachment style with the old part. Price reference: ₹35.00 (MRP shown on supplied label). Please match the exact part number and motorcycle application before ordering.

Royal Enfield Gear Shifter Assembly (Part Number RAE00054/B) is a spare part or product identified by its exact part number. Match the part number and vehicle application before ordering. Royal Enfield Meteor 350 application.

Royal Enfield Brake Pedal Assembly (Part Number RAE00409/C) is a spare part or product identified by its exact part number. Match the part number and vehicle application before ordering. Verify vehicle/model compatibility by exact part number.

Royal Enfield Front Mudguard, Glossy Black (Part Number RAG00061/D) is a spare part or product identified by its exact part number. Match the part number and vehicle application before ordering. Royal Enfield Meteor 350 application.

Royal Enfield Front Mudguard, Painted, RAL Black (Part Number RAG00430/A) is a spare part or product identified by its exact part number. Match the part number and vehicle application before ordering. Verify vehicle/model compatibility by exact part number.

Royal Enfield Front Mudguard, Black (Part Number RAH00059) is a spare part or product identified by its exact part number. Match the part number and vehicle application before ordering. Royal Enfield Bullet 350 / Bullet X350 / Bullet 350X listings; verify exact model/year.

Royal Enfield Instrument Bracket (Part No. RAH00390/E) is a replacement component for the specified motorcycle system. The instrument bracket supports the motorcycle’s instrument cluster or related instrument mounting hardware. Mounting geometry, screw positions and clearance around the harness must match the original bracket. Model/year compatibility is not fully confirmed from the supplied label; Before ordering, compare the part number, original component, variant and relevant mount/connector details. Compare the instrument-cluster mounting pattern, fastener locations and clearance with the existing bracket.

Royal Enfield Fuel Tank Badge, Grey, RH (Part Number RAK00371/D) is a spare part or product identified by its exact part number. Match the part number and vehicle application before ordering. Royal Enfield Super Meteor 650 Astral Black/Blue application.

Royal Enfield Fuel Tank, Painted, Astral Black (Part Number RAK00578/B) is a spare part or product identified by its exact part number. Match the part number and vehicle application before ordering. Royal Enfield Super Meteor 650 Astral Black application.

Royal Enfield Throttle Grip (Part Number RAL00015/E) is a spare part or product identified by its exact part number. Match the part number and vehicle application before ordering. Royal Enfield Super Meteor 650, Interceptor 650, Continental GT 650, Shotgun 650 and Classic 650 applications; verify exact model.

Royal Enfield Part No. RAL00019/F – Clutch Lever. The label identifies Clutch Lever. A replacement lever must match the handlebar perch and pivot geometry so the clutch cable operates through its intended travel and returns correctly. Price reference: ₹953.00 (MRP shown on supplied label). Please match the exact part number and motorcycle application before ordering.

Royal Enfield Throttle Cable Assembly (Part No. RAL00147/E) is a replacement component for the specified motorcycle system. The throttle cable transmits movement from the throttle grip to the throttle mechanism. Correct cable length, end fittings and routing are required for smooth throttle operation and safe return to idle. Model/year compatibility is not fully confirmed from the supplied label; Before ordering, compare the part number, original component, variant and relevant mount/connector details. Compare cable length, end fittings and routing; after installation, confirm full throttle return at all handlebar positions.

Royal Enfield Switch Cube RH, Silver (Part Number RAL00154/E) is a spare part or product identified by its exact part number. Match the part number and vehicle application before ordering. Verify vehicle/model compatibility by exact part number.

Royal Enfield Switch Cube RH, Black (Part Number RAL00155/E) is a spare part or product identified by its exact part number. Match the part number and vehicle application before ordering. Verify vehicle/model compatibility by exact part number.

Royal Enfield Holder, Clutch Lever (Part No. RAL00453/B) is a replacement component for the specified motorcycle system. The clutch-lever holder/perch supports the clutch lever at the handlebar and provides the specified pivot/mounting geometry. Lever movement, cable adjuster position and control layout should match the original assembly. Model/year compatibility is not fully confirmed from the supplied label; Before ordering, compare the part number, original component, variant and relevant mount/connector details. Check holder/perch versus clamp; confirm the exact lever pivot, cable adjuster and mounting layout. Related lever hardware may be separate.

Rugged Rally Seat designed for off-road posture and adventure riding.

Royal Enfield Part No. RAN00042/C – LED Tail Lamp Assembly. The package label identifies Tail Lamp Assembly – LED. LED and bulb-type assemblies are not necessarily interchangeable; match connector layout and the motorcycle’s wiring configuration. Price reference: ₹1,670.00 (MRP shown on supplied label). Please match the exact part number and motorcycle application before ordering.

Royal Enfield Headlamp Rim Assembly (Part No. RAN00065/B) is a replacement component for the specified motorcycle system. The headlamp rim retains/finishes the headlamp assembly at the front of the motorcycle. Rim diameter, retaining points, finish and compatibility with the headlamp housing must match; this item is a rim assembly, not automatically a complete headlamp. Verified application: Royal Enfield Interceptor 650 and Continental GT 650 with the matching halogen headlamp rim setup (Euro IV/V applications are listed). Confirm the original rim finish and headlamp size. Before ordering, compare the part number, original component, variant and relevant mount/connector details. Confirm 650 Twin halogen headlamp rim size and finish; a rim is not a complete headlamp assembly.

Royal Enfield Headlamp Assembly, Black (Part No. RAN00084/C) is a replacement component for the specified motorcycle system. This black headlamp assembly is the complete front-lighting unit for the specified 650 Twin application. Housing colour, bulb technology, connector and mounting arrangement should be compared with the original assembly before ordering. Verified application: Royal Enfield Interceptor 650 and Continental GT 650 black-housing headlamp assembly variants. The matching headlamp family uses different colour/part-number variants; match the exact part number and headlamp type. Before ordering, compare the part number, original component, variant and relevant mount/connector details. Confirm Interceptor 650/Continental GT 650 application, black housing, bulb connector and mounting points.

Royal Enfield Headlamp Assembly with Bulb (Part No. RAN00126/A) is a replacement component for the specified motorcycle system. The headlamp assembly with bulb is a replacement front-lighting unit. The housing, bulb type, connector and mounting tabs need to match the motorcycle’s original headlamp setup to avoid wiring changes or incorrect beam alignment. Verified application: Royal Enfield Hunter 350 J-Series / BS6. The reference describes a black-housing headlamp assembly with bulb; confirm the original connector and housing before ordering. Before ordering, compare the part number, original component, variant and relevant mount/connector details. Confirm Hunter 350 J-Series application and compare bulb, connector and mounting tabs before fitting.

Royal Enfield Tail Lamp Housing (Part Number RAN00166/E) is a spare part or product identified by its exact part number. Match the part number and vehicle application before ordering. Verify vehicle/model compatibility by exact part number.

Royal Enfield Lens (Part No. RAN00280/A) is a replacement component for the specified motorcycle system. This listing identifies a lens component by its part number. Because the supplied label does not confirm the exact lamp position or model application, compare its shape, lens colour, locating tabs and original part code before buying. Model/year compatibility is not fully confirmed from the supplied label; Before ordering, compare the part number, original component, variant and relevant mount/connector details. Confirm which lamp housing uses this lens and compare colour, shape and locating tabs; do not buy based on the word “lens” alone.

Royal Enfield Trafficator Assembly with Bulb, FLH (TB) (Part No. RAN00306/B) is a replacement component for the specified motorcycle system. The trafficator assembly with bulb is part of the turn-signal system. The label includes the “FLH (TB)” application/position code; confirm the side, front/rear position, bulb and connector against the motorcycle parts diagram. Model/year compatibility is not fully confirmed from the supplied label; Before ordering, compare the part number, original component, variant and relevant mount/connector details. Confirm the label’s FLH (TB) marker against the motorcycle parts diagram, including side and front/rear position.

Royal Enfield LED Indicator, Combined Rear (Part No. RAN00364/F) is a replacement component for the specified motorcycle system. The combined rear LED indicator is a rear lighting/turn-signal component. Connector, side/position, mounting point and electrical setup must match the exact model; an integrated LED unit should not be assumed interchangeable with a bulb-type indicator. Model/year compatibility is not fully confirmed from the supplied label; Before ordering, compare the part number, original component, variant and relevant mount/connector details. Confirm whether the part is left/right or sold as a pair, and verify the rear wiring connector before ordering.

Royal Enfield Part No. RAN00398/D – Tail Lamp Assembly. The package label identifies Tail Lamp Assembly. Check the exact part number and compare the shape, bulb/LED arrangement and connector before installation; model generations may use different assemblies. Price reference: ₹2,000.00 (MRP shown on supplied label). Please match the exact part number and motorcycle application before ordering.

Royal Enfield LED Headlamp Assembly (Part Number RAN00479/E) is a spare part or product identified by its exact part number. Match the part number and vehicle application before ordering. Verify vehicle/model compatibility by exact part number.

Royal Enfield Part No. RAN00568/A – Outer Rim Assembly. The package label identifies Outer Rim Assembly. The label does not name the exact installation location, so the product should be matched to the original rim/outer assembly by part number, diameter, finish and fastening points. Price reference: ₹2,376.00 (MRP shown on supplied label). Please match the exact part number and motorcycle application before ordering.

Royal Enfield Headlamp Rim Assembly (Part Number RAN00870/A) is a spare part or product identified by its exact part number. Match the part number and vehicle application before ordering. Verify vehicle/model compatibility by exact part number.

Royal Enfield Headlamp Assembly, LED (Part Number RAN00879/A) is a spare part or product identified by its exact part number. Match the part number and vehicle application before ordering. Verify vehicle/model compatibility by exact part number.

Royal Enfield Rim Assembly, Matt Black (Part No. RAN01331/D) is a replacement component for the specified motorcycle system. This listing identifies a matt-black rim assembly by its printed part number. The exact wheel position and dimensional specification are not confirmed by the label alone, so verify diameter, width, offset and mounting configuration against the parts catalogue. Model/year compatibility is not fully confirmed from the supplied label; Before ordering, compare the part number, original component, variant and relevant mount/connector details. Verify wheel position, dimensions, offset, spoke/alloy construction and matt-black finish using the old part number and catalogue.

Royal Enfield Common Keyset (Part Number RAP00013/E) is a spare part or product identified by its exact part number. Match the part number and vehicle application before ordering. Royal Enfield Meteor 350 application.

Royal Enfield Common Key Set (Part Number RAP00075/B) is a spare part or product identified by its exact part number. Match the part number and vehicle application before ordering. Verify vehicle/model compatibility by exact part number.

Royal Enfield Bearing 6205 (Part No. RAT00054/A) is a replacement component for the specified motorcycle system. The 6205 bearing identified by this part number is listed for the sprocket-carrier location on the Royal Enfield 650 Twin platform. Bearing position matters: do not substitute it for a different rear-wheel bearing just because the part looks similar. Verified application: Royal Enfield Interceptor 650 and Continental GT 650 sprocket-carrier bearing location (6205). It is not a generic substitute for the separate rear-wheel hub bearings; confirm the exact location in the parts diagram. Before ordering, compare the part number, original component, variant and relevant mount/connector details. Confirm the sprocket-carrier bearing location and bearing specification 6205; do not substitute it for the wheel-hub bearings.

Royal Enfield Part No. RAT00217/A – Chain Rivet Link – 520. The package label identifies Chain Rivet Link, 520. The joining link must match the drive chain’s pitch, width, construction and rivet style; use the correct chain tool and follow the chain maker’s service procedure. Price reference: ₹26.00 (MRP shown on supplied label). Please match the exact part number and motorcycle application before ordering.

Royal Enfield Alloy Rim Sub Assembly, Rear, Black (Part Number RAT00704/A) is a spare part or product identified by its exact part number. Match the part number and vehicle application before ordering. Verify vehicle/model compatibility by exact part number.

Royal Enfield Part No. RAW00050/A – Centre Stand Spring. The label identifies Spring, Centre Stand. This spring returns the centre stand toward its riding position; correct tension and hook geometry matter for secure retraction. Price reference: ₹61.00 (MRP shown on supplied label). Please match the exact part number and motorcycle application before ordering.

Royal Enfield Rubber, Upstop, Center (Part No. RAW00225/F) is a replacement component for the specified motorcycle system. The centre-stand upstop rubber is a small cushioning stopper contacted when the stand returns to its resting position. It helps prevent harsh metal-to-metal contact and should match the specified stand and frame arrangement. Verified application: Royal Enfield Himalayan 450; current exact-part references also list Guerrilla 450. Verify against the motorcycle parts diagram before ordering. The reference describes this as a centre-stand stopper rubber, not a complete stand. Before ordering, compare the part number, original component, variant and relevant mount/connector details. Confirm centre-stand fitment and whether the supplied pack quantity matches the catalogue; the stopper rubber is not the stand itself.

Royal Enfield Royal Enfield Engine Oil 1.7 L (Part Number RE-ENGINE-OIL-1.7L) is a spare part or product identified by its exact part number. Match the part number and vehicle application before ordering. General Royal Enfield motorcycle engine-oil application; verify required oil grade and capacity for your model.

Genuine Rear Mudguard Complete with Sticker in Classic Ash color.

Protective Rear Mudflap to prevent dirt and water spray splash.

Factory-finished Gloss Black Rear Mudguard for classic motorcycles.

Complete Rear Number Plate Assembly with brackets and lighting mount.

Sturdy Rear Rack carrier for luggage mounting and utility.

High-reliability Relay Starter solenoid switch for electric start system.

Genuine Royal Enfield Relay Starter assembly for reliable electric ignition.

Premium Relay Starter switch module for heavy-duty starting circuits.

Reliable Starter Relay switch for seamless electric starting performance.

Standard OEM Relay Starter switch for consistent ignition operation.

Precision-made Valve Spring Retainer for reliable engine valve operation.

Replacement Rider Seat Assembly with comfortable padding and waterproof base.

Premium Silver 2.5 x 18 inch Spoke Wheel Rim for ultimate durability.

Royal Enfield Part No. RLG00123/A – Cam Chain. The label identifies Cam Chain. The cam chain synchronises crankshaft and camshaft rotation in the engine. Chain length, pitch and tensioner compatibility must match the specific engine; timing work should be handled by a qualified mechanic. Price reference: ₹825.00 (MRP shown on supplied label). Please match the exact part number and motorcycle application before ordering.

Royal Enfield Part No. RLK00061/C – Clutch Pressure Plate Component. The package label identifies Plate Comp, Clutch Pressure and shows net quantity 4 numbers. Treat the supplied pack contents as labelled and confirm the required count for the model’s clutch stack. Price reference: ₹427.00 (MRP shown on supplied label). Please match the exact part number and motorcycle application before ordering.

Royal Enfield Part No. RLK00068/A – Center Clutch. The package label identifies Center Clutch. This is a component of the clutch assembly; splines, mating surface and fitment sequence must match the original unit. Price reference: ₹437.00 (MRP shown on supplied label). Please match the exact part number and motorcycle application before ordering.

Royal Enfield Plate Complete, Clutch Pressure (Part No. RLK00069/A) is a replacement component for the specified motorcycle system. The clutch-pressure plate assembly applies clamping force to the clutch pack when the clutch is engaged. The assembly must match the engine and clutch design; mixing plates or pressure components from different platforms can cause incorrect engagement. Model/year compatibility is not fully confirmed from the supplied label; Before ordering, compare the part number, original component, variant and relevant mount/connector details. Confirm the exact clutch family and compare old pressure plate shape/part code; professional clutch adjustment may be needed after service.

Royal Enfield Part No. RLK00153/A – Clutch Friction Disc. The label identifies Disk Clutch Friction and shows net quantity 4 numbers. Friction discs work as part of a matched clutch stack; use the exact part number and confirm whether the required service includes other plain/friction plates. Price reference: ₹338.00 (MRP shown on supplied label). Please match the exact part number and motorcycle application before ordering.

Royal Enfield Gear – 3rd and 4th Drive (Part Number RLL00200/D) is a spare part or product identified by its exact part number. Match the part number and vehicle application before ordering. Verify vehicle/model compatibility by exact part number.

Royal Enfield Part No. RLM00080/A – Shifter Shaft Assembly with Rivet. The package label identifies Shifter Shaft Assy-With Rivet. The component forms part of the gear-shift linkage/shaft assembly; exact shaft geometry and connection details matter for selecting the correct replacement. Price reference: ₹723.00 (MRP shown on supplied label). Please match the exact part number and motorcycle application before ordering.

Royal Enfield Throttle Body Assembly (Part No. RLT00185/B) is a replacement component for the specified motorcycle system. The throttle-body assembly meters intake air in a fuel-injected engine in response to throttle input. Connector layout, bore/actuator specification and ECU compatibility must match the original unit; diagnosis should precede replacement. Model/year compatibility is not fully confirmed from the supplied label; Before ordering, compare the part number, original component, variant and relevant mount/connector details. Verify model/VIN, part suffix, connector, sensor/actuator arrangement and intake dimensions using a diagnostic/parts reference.

Royal Enfield Throttle Body Assembly (Part No. RLT00186/B) is a replacement component for the specified motorcycle system. The throttle-body assembly meters intake air for the matching fuel-injected engine platform. This is a different part number from RLT00185/B; confirm the exact suffix, connectors, actuator and engine variant before ordering. Model/year compatibility is not fully confirmed from the supplied label; Before ordering, compare the part number, original component, variant and relevant mount/connector details. Do not substitute for RLT00185/B based on appearance. Verify the specific throttle-body variant and connector/electrical configuration.
No products in the basket.