-

₹1,633.00
Royal Enfield Disc Plate Rear (Part No. 1010093/C) is a replacement component for the specified motorcycle system. The rear disc plate is the rotating braking surface that the rear brake pads clamp against to slow the motorcycle. A correctly matched disc is important for proper pad contact, braking feel and fitment within the original rear-brake assembly. Verified application: Royal Enfield Classic 350 with rear-disc brake (BS3/BS4 variants), Thunderbird 350/500 rear-disc variants and Bullet 500 rear-disc model. Match the exact rear-disc setup and part number; do not assume fitment for drum-brake variants. Before ordering, compare the part number, original component, variant and relevant mount/connector details. Confirm that the motorcycle has a rear disc brake, and check rotor diameter, thickness, bolt pattern and the old part number before ordering.
-

₹727.00
Royal Enfield Hub Clutch (Part No. 570434/D) is a replacement component for the specified motorcycle system. The clutch hub is the central component of the clutch pack that locates/supports clutch plates as the clutch transmits engine torque to the transmission. The hub must match the correct engine family and clutch-stack arrangement. Verified application: UCE single-cylinder Royal Enfield models including Classic 350/500, Bullet 350/500, Electra 350, Thunderbird 350/500 and Continental GT 535 applications are listed for this clutch hub. It supports the relevant 6- or 7-plate UCE clutch configuration; it is not listed for the 650 Twin platform. Before ordering, compare the part number, original component, variant and relevant mount/connector details. Confirm the UCE engine and 6-/7-plate clutch arrangement. Do not use on the Interceptor/GT 650 clutch platform.
-

₹329.00
Royal Enfield Wheel Clutch Machined (Part No. 570435/B) is a replacement component for the specified motorcycle system. The machined wheel clutch/clutch-centre component supports the clutch-pack arrangement and helps the clutch engage and disengage as designed. The exact engine platform and clutch configuration matter because UCE and newer J-series parts are not interchangeable by appearance alone. Verified application: Royal Enfield 350cc UCE models including Classic 350 UCE, Bullet 350 UCE, Electra 350 UCE and Thunderbird 350 UCE. Not for newer J-Series models such as Classic Reborn, Hunter 350 or Meteor 350. Before ordering, compare the part number, original component, variant and relevant mount/connector details. Confirm that the motorcycle uses the 350cc UCE clutch. Newer J-Series 350s use a different clutch specification.
-

₹1,577.00
Royal Enfield Clutch Plate Kit, TBTS (Part No. 597459) is a replacement component for the specified motorcycle system. This clutch plate kit is intended for a matched clutch-stack service rather than selecting individual plates by appearance. A correct kit helps restore the specified plate combination when the clutch has wear or engagement problems. Verified application: Royal Enfield UCE 350 clutch applications including Classic 350 UCE, Bullet 350 UCE, Electra 350 UCE and Thunderbird 350 UCE. Not intended for 500cc clutch systems or J-Series 350 models; verify clutch-stack specification. Before ordering, compare the part number, original component, variant and relevant mount/connector details. Confirm UCE 350 plate stack. Do not fit to a 500cc or J-Series clutch unless a parts catalogue explicitly matches the SKU.
-

₹840.00
Royal Enfield Mirror Set, Thunderbird 500, Black (Part No. 888193) is a replacement component for the specified motorcycle system. This black mirror set provides rear-view visibility using the left-hand and right-hand mirrors specified for the named model family. Thread size, stalk angle and pair configuration should be checked against the existing mirrors. Verified application: Royal Enfield Thunderbird 350/500 black mirror set, identified as a left-hand/right-hand pair. Do not assume Thunderbird X or other mirror-mount variants fit without checking threads and model year. Before ordering, compare the part number, original component, variant and relevant mount/connector details. Check that the kit contains both LH and RH mirrors and confirm the thread/mount direction; do not assume Thunderbird X fitment.
-

₹3,070.00
Royal Enfield E20 Carburettor Assembly, UCE 350 BS3 (Part No. RLT00241/A) is a replacement component for the specified motorcycle system. This BS29 carburettor assembly is identified for a BS3 UCE 350 application. Carburettor calibration, fuel compatibility, cable fittings and intake connections must match the target bike; BS3 and BS4 UCE assemblies should not be treated as interchangeable. Verified application: Royal Enfield BS3 UCE 350 carburettor applications including Classic 350, Bullet 350, Electra 350 and Thunderbird 350 carb models. The source describes RLT00241/A as the E20-compatible BS29 unit for BS3; BS4 uses a different part number and newer J-Series models are not the intended application. Before ordering, compare the part number, original component, variant and relevant mount/connector details. Confirm BS3 UCE 350 carburettor application. Do not use the BS4 part number or a J-Series EFI model; preserve the exact part-number suffix.