Electra 350

Showing all 5 results

  • PART-NO-570434D-HUB-CLUTCH

    Royal Enfield 570434/D Hub Clutch

    ₹727.00

    Royal Enfield Hub Clutch (Part No. 570434/D) is a replacement component for the specified motorcycle system. The clutch hub is the central component of the clutch pack that locates/supports clutch plates as the clutch transmits engine torque to the transmission. The hub must match the correct engine family and clutch-stack arrangement. Verified application: UCE single-cylinder Royal Enfield models including Classic 350/500, Bullet 350/500, Electra 350, Thunderbird 350/500 and Continental GT 535 applications are listed for this clutch hub. It supports the relevant 6- or 7-plate UCE clutch configuration; it is not listed for the 650 Twin platform. Before ordering, compare the part number, original component, variant and relevant mount/connector details. Confirm the UCE engine and 6-/7-plate clutch arrangement. Do not use on the Interceptor/GT 650 clutch platform.

  • PART-NO-570435B-WHEEL-CLUTCH-MACHINED

    Royal Enfield 570435/B Wheel Clutch Machined

    ₹329.00

    Royal Enfield Wheel Clutch Machined (Part No. 570435/B) is a replacement component for the specified motorcycle system. The machined wheel clutch/clutch-centre component supports the clutch-pack arrangement and helps the clutch engage and disengage as designed. The exact engine platform and clutch configuration matter because UCE and newer J-series parts are not interchangeable by appearance alone. Verified application: Royal Enfield 350cc UCE models including Classic 350 UCE, Bullet 350 UCE, Electra 350 UCE and Thunderbird 350 UCE. Not for newer J-Series models such as Classic Reborn, Hunter 350 or Meteor 350. Before ordering, compare the part number, original component, variant and relevant mount/connector details. Confirm that the motorcycle uses the 350cc UCE clutch. Newer J-Series 350s use a different clutch specification.

  • PART-NO-590273A-SPEEDOCABLE-COMPLETE

    Royal Enfield 590273/A Speedometer Cable Complete

    ₹450.00

    Royal Enfield Speedometer Cable Complete (Part No. 590273/A) is a replacement component for the specified motorcycle system. A mechanical speedometer cable transfers rotational movement from the drive point to a compatible speedometer. A cable with the wrong length, end fittings or routing may bind or give unreliable readings. Verified application: Older Royal Enfield UCE applications listed include Classic 350 (BS3/BS4), Classic 500 EFI, Bullet 500 UCE and Electra 350 UCE. Not listed for Classic 350 Reborn/J-Series; verify cable ends and routing. Before ordering, compare the part number, original component, variant and relevant mount/connector details. Confirm the mechanical speedometer drive, cable length, end fittings and routing. J-Series electronic speedometers use a different system.

  • PART-NO-597459-CLUTCH-PLATE-KIT-TBTS

    Royal Enfield 597459 Clutch Plate Kit, TBTS

    ₹1,577.00

    Royal Enfield Clutch Plate Kit, TBTS (Part No. 597459) is a replacement component for the specified motorcycle system. This clutch plate kit is intended for a matched clutch-stack service rather than selecting individual plates by appearance. A correct kit helps restore the specified plate combination when the clutch has wear or engagement problems. Verified application: Royal Enfield UCE 350 clutch applications including Classic 350 UCE, Bullet 350 UCE, Electra 350 UCE and Thunderbird 350 UCE. Not intended for 500cc clutch systems or J-Series 350 models; verify clutch-stack specification. Before ordering, compare the part number, original component, variant and relevant mount/connector details. Confirm UCE 350 plate stack. Do not fit to a 500cc or J-Series clutch unless a parts catalogue explicitly matches the SKU.

  • PART-NO-RLT00241A-E20-CARBURETTOR-ASSY-UCE-350-BS3

    Royal Enfield RLT00241/A E20 Carburettor Assembly, UCE 350 BS3

    ₹3,070.00

    Royal Enfield E20 Carburettor Assembly, UCE 350 BS3 (Part No. RLT00241/A) is a replacement component for the specified motorcycle system. This BS29 carburettor assembly is identified for a BS3 UCE 350 application. Carburettor calibration, fuel compatibility, cable fittings and intake connections must match the target bike; BS3 and BS4 UCE assemblies should not be treated as interchangeable. Verified application: Royal Enfield BS3 UCE 350 carburettor applications including Classic 350, Bullet 350, Electra 350 and Thunderbird 350 carb models. The source describes RLT00241/A as the E20-compatible BS29 unit for BS3; BS4 uses a different part number and newer J-Series models are not the intended application. Before ordering, compare the part number, original component, variant and relevant mount/connector details. Confirm BS3 UCE 350 carburettor application. Do not use the BS4 part number or a J-Series EFI model; preserve the exact part-number suffix.